Not all water extraction is the same. Consumer-grade shop vacuums pull surface water while saturation continues working into subfloor and wall assemblies. COS Water Damage Restoration's Boerne Water Extraction service deploys truck-mounted commercial systems rated for high-volume output — combined with thermal imaging and moisture metering that maps where the water you can't see has traveled.
High-volume truck-mounted extractors for large-scale flooding events in Boerne.
FLIR thermal cameras reveal moisture in walls and under floors invisible to the naked eye.
Pinpoint and pin-type meters used to document exact moisture levels at each sensor point.
For deep standing water in Boerne basements and crawlspaces before truck-mount transition.
The gap between a good extraction and a mediocre one isn't visible until weeks later — when mold shows up behind a wall that felt dry after a shop-vac cleanup. Here's what makes COS Water Damage Restoration's Boerne extraction service different.
Every Boerne job gets truck-mounted extraction rated for high-volume output, thermal imaging cameras that reveal sub-surface saturation, and moisture meters that document conditions at every sensor point. Consumer rental equipment doesn't come close.
The faster extraction begins, the smaller the final damage scope. Speed is built into our Boerne operation.
Science-based extraction and drying produces better outcomes than intuition-based approaches.
On arrival in Boerne, our crew assesses, prepares a written Xactimate-based estimate, and reviews it with you before a single piece of equipment is operated. The approved number is the invoiced number.
The right extraction approach depends on the water volume, source category, affected materials, and property type. Here's how we handle each scenario in Boerne.
Truck-mounted extraction systems — the most powerful commercial water removal equipment available — are deployed for high-volume flooding events in Boerne: storm flooding, major pipe failures, and large appliance failures that release significant water rapidly. Truck-mount output far exceeds portable units, reducing total extraction time and limiting saturation of structural assemblies.
Leaving hidden moisture behind after extraction is how Boerne properties develop mold three weeks after a "completed" job by another company.
Hardwood floor salvage is a specialty — not every water extraction crew in Boerne has the training or equipment to do it right.
Below-grade water extraction in Boerne requires submersible pump capability for standing water, then portable extractor transition for residual moisture, and finally vapor barrier inspection and replacement to prevent recurring moisture accumulation. Confined space protocols apply in crawlspaces with limited access — our Boerne crew carries the right equipment for each below-grade scenario.
Carpet may be salvageable when extracted quickly; pad is typically replaced regardless. Our Boerne team makes this determination honestly, based on the data.
Commercial extraction documentation is prepared to adjuster-ready standard throughout the process.


Live Boerne dispatch — no voicemail, no hold queue, no automated menu.
Our crew arrives with truck-mounted and portable extraction equipment configured for your reported scenario. Equipment is staged during transit so the crew is productive immediately on arrival — not spending 20 minutes unloading and setting up in your driveway.
Thermal imaging and moisture mapping precede extraction — so the scope is fully known before equipment runs. A written estimate is reviewed with you and approved before work begins. No extraction happens without your sign-off on the scope and cost.
Extraction is thorough — surface water, sub-floor moisture, and cavity saturation are all addressed in sequence. Immediately after extraction, our crew stages dehumidifiers and air movers to begin the structural drying program before mold risk accumulates.



"The thermal imaging step was what impressed me most. Our Boerne property looked dry to me, but their camera showed moisture migration behind the baseboard on two walls I never would have suspected. If that had been left in place and the drying missed it, we'd have had mold within the month. Very glad they do this as standard procedure."
"Our hardwood floors in a Boerne craftsman home were at risk after the flooding. The COS Water Damage Restoration crew's extraction specialist assessed the moisture content in the boards during extraction and confirmed they were within the drying window for mat drying. We saved the floors — the difference in cost versus replacement was significant. The specialist explained the whole process and called with readings every morning."
"The written estimate before extraction was a first for me — every other contractor I've used has just started working and handed me a bill. COS Water Damage Restoration's pricing conversation happens before the equipment turns on. That's the right way to do it and I won't use anyone who doesn't operate this way."
Our Boerne team serves nearby communities — call +1-844-499-0972 to confirm your address is in our service area.
COS Water Damage Restoration's Boerne Water Extraction crew is on standby. Call +1-844-499-0972 for a fast, thorough, documented extraction — with written pricing before we start.
📞 Call +1-844-499-0972 — Boerne Extraction Team24/7 Dispatch · IICRC Certified · Truck-Mounted Equipment · Boerne, TX